Product ID:SUNPROOF HOUSE PAINT MIDTONE BASE, 1-150 (0
MSDS Date:04/04/1991
FSC:8010
NIIN:00N025491
MSDS Number: BMQYV

PPG INDUSTRIES INC (WAS PTTTSBURGH PLATE GLASS CO)

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 800-245-2590; 412-492-5555

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

SINCE OVEREXP ARE NOT EXPECTED, THERE IS NO

RTECS: 9999999ZZ

CRYSTALLINE SILICA WHICH IARC ASSOCIATES WITH AN

RTECS: 9999999ZZ

TO CRYSTALLINE SILICA MAY ALSO LEAD TO A DISABLING

RTECS: 9999999ZZ

BRTHG EXCESSIVE AMTS OF SILICA DUST. APPLICATION OF

RTECS: 9999999ZZ

RESPIRABLE SILICA, SO THE POTENTIAL HAZARD FOR

RTECS: 9999999ZZ

HAVE MATL SATETY DATA SHEET INFO AVAILABLE.

RTECS: 9999999ZZ

SKIN/EYE IRRITATION OR BREATHING DIFFICULTIES.

RTECS: 9999999ZZ

AVOID FREE FALL OF LIQUIDS IN EXCESS OF A FEW

RTECS: 9999999ZZ

LITERATURE CAREFULLY TO DETERMINE TYPE OF

RTECS: 9999999ZZ

AND HOW IT IS TO BE PROPERLY FITTED.

RTECS: 9999999ZZ

LIMITS, THE LEL LIMIT, AND TO REMOVE DECOMP PRODS

RTECS: 9999999ZZ

RISK OF CANCER FROM EXPOS. POTENTIAL FOR INHAL OF

RTECS: 9999999ZZ

PHTHALIMIDE, N-((TRICHLOROMETHYL) THIO)-;

CAS: 133-07-3

RTECS: TI5685000

Fraction By Weight: 1-2%

ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 10-15%

DIATOMACEOUS EARTH; (SILICA-AMORPHOUS-DIATOMACEOUS EARTH)

CAS: 61790-53-2

RTECS: HL8600000

Fraction By Weight: 5-10%

OSHA PEL 20 MPPCF

ACGIH TLV: 10 MG/M3 TDUST; 9293

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

NAPHTHA, MEDIUM ALIPHATIC; (MEDIUM ALIPHATIC SOLVENT

CAS: 64742-88-7

Fraction By Weight: 25-30%

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 35-40%

THE FOLLOWING HAZ MATERIALS ARE COMPONENTS OF ONE OR MORE

RTECS: 9999999ZZ

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 2-5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

CONC & INHALING CONTENTS CAN BE HARMFUL/FATAL.

RTECS: 9999999ZZ

TITANIUM DIOXIDE. ANIMALS INHALING MASSIVE QUANTITIES

RTECS: 9999999ZZ

DEVELOPED LUNG TUMORS. STUDIES W/HUMANS INVOLVED IN

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL. EYE:CAUSES
IRRIT. SKIN:MAY CAUSE MOD IRRIT. INHAL:VAP & SPRAY MIST MAY BE
HARMFUL. VAP IRRITATES EYES, NOSE & THROAT. SANDING/GRINDING DUSTS
MAY BE HARMFUL. RPTD EXPOS TO HIGH VA P CONC MAY CAUSE IRRIT OF THE
RESP SYS & PERM BRAIN & NERVS SYS DAM. INTENTIONAL MISUSE BY DELIB
(ING 9)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE: GROUP 2A
(IARC);GROUP 2 (NTP)
Effects of Overexposure:EYE WATERING, HDCHS, NAUS, DIZZ & LOSS OF
COORDINATION ARE INDICATIONS THAT SOLV LEVELS ARE TOO HIGH.
REDNESS, ITCHING, BURNING SENSATION & VISUAL DISTURBANCES MAY
INDICATE EXCESSIVE EYE CONT. DRYNESS , ITCHING, CRACKING, BURNING,
REDNESS &SWELLING ARE CONDITIONS ASSOCIATED WITH EXCESSIVE SKIN
CONTACT.

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR AT LEAST 15 MIN. SKIN: REMOVE PROMPTLY BY WIPING, FOLLOWED BY
WATERLESS HAND CLEANER & SOAP & WATER. INHAL: IF AFTD BY VAP/SPRAY
MIST, REMOVE TO FRESH AIR. APPLY ARTF RESP &OTHER SUPPORTIVE
MEASURES AS REQD. OTHER:IF ANY OF THE FOLLOWING OCCUR
DURING/FOLLOWING USE OF THIS PROD, CONT POIS CTL CTR, EMER ROOM/MD
IMMED; (ING 18)

Flash Point Method:PMCC
Flash Point:115F,46C
Lower Limits:1%
Extinguishing Media:USE NFPA CLASS B EXTING (CO*2/DRY CHEM/UNIVERSAL AQ
FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS II (SUPP DATA)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFTIVE.WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPP DATA)

Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERSONNEL EQUIPPED
W/PROPER RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN THE AREA.
REMOVE ALL SOURCES OF IGNITION. TAKE UP SPILLED MATERIAL WITH
SAWDUST, VERMICULITE, OR OT HER ABSORBENT MATL AND PLACE INTO
CNTNRS FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATL IS PART OF A MULTIPLE COMPONENT COATING SYS,
READ MATL SAFETY DATA SHEETS FOR OTHER COMPONENT(S) BEFORE BLENDING
AS THE RESULTING MIXTURE MAY HAVE THE HAZ OF ALL OF ITS PARTS.
CNTNRS SHOULD BE GROUNDED WHEN POURING. (ING 20)

Respiratory Protection:OVEREXP TO VAPS MAY BE PVTND BY ENSURING VENT
CONTROLS, VAP EXHAUST/FRESH AIR ENTRY.NIOSH/MSHA APPROVED (TC-23C-)
PAINT SPRAY/AIR SUPPLIED (TC-19C) RESPIRATORS MAY ALSO REDUCE
EXPOS. READ RESPIRATOR M FR'S INSTRUCTIONS & (ING 21)
Ventilation:PROVIDE GEN DILUTION/LOCAL EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS (ING 23)
Protective Gloves:NITRILE/NEOPRENE RUB/POLYVINYL ALCOHOL.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA:COMBUST LIQ FIRES. FIRE FIGHT PROC:& POSS AUTOIGNIT/EXPLO
WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG NOZZ ARE PREF.
EXPLO HAZ:SURFS. TOX GASES MAY FORM WHEN PROD IS CONTACTED BY FL
AME/HOT SURFS. HAZ DECOMP:FUMES INCLUDING: CO.

HCC:F4
Boiling Pt:B.P. Text:>280F,138C
Vapor Pres:2.1
Vapor Density:HVR/AIR
Spec Gravity:1.18
Evaporation Rate & Reference:18 (BUOAC=100)
Solubility in Water:0.2%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
SOLVENTS.
Percent Volatiles by Volume:44.50

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELDING,BRAZING/FLAME-CUTTING ON SURFS COATED W/PROD MAY
PRODUCE (SUPP DATA)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W
FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMEN T FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.